QoS Implementation

Stop Letting Background Traffic Ruin Your VoIP Calls.

If voice, video, and critical apps compete equally with file transfers and cloud backups - your most important traffic loses every time there's congestion.

SRS Networks implements end-to-end QoS policies - classifying traffic, marking DSCP values, configuring priority queuing, and shaping WAN traffic - so your network always delivers for what matters most.

The Problem

Every Packet Treated Equally Is a Performance Problem

Default network behavior treats a VoIP call the same as a software download. That's fine when bandwidth is unlimited. When it isn't - and it never is - real-time traffic suffers first and most.

Choppy VoIP Calls Nobody Can Explain

Users complain about choppy audio, dropped calls, and one-sided conversations. The problem isn't the phone system - it's the network treating VoIP packets the same as file downloads.

Video Conferences That Buffer and Freeze

A single large file transfer or backup job during a Teams or Zoom meeting can saturate uplink bandwidth and kill the call. Without QoS, there's no way to protect real-time traffic.

Slow ERP and CRM During Peak Hours

Business-critical applications slow to a crawl at 10 a.m. when everyone's in the office. The applications aren't broken - they're losing the bandwidth fight to background traffic.

No Traffic Prioritization in Place

If you have a flat network with no traffic marking or queuing policies, every packet - a VoIP call, a YouTube stream, a ransomware backup - gets the exact same treatment.

Bandwidth Consumed by Non-Business Traffic

Software updates, cloud backups, and personal video streaming consume the same pipe as your core business applications. Without shaping policies, the important traffic always loses.

The Solution

End-to-End QoS That Works Across Your Entire Network.

QoS only works when it's consistent from end to end. A single device with an incorrect DSCP trust boundary undoes every policy downstream. SRS Networks designs QoS architectures that cover every hop - access switches, distribution, core, WAN edge, and wireless - and validates them with real traffic before we hand anything off.

Traffic classification at ingress - every flow identified and marked correctly
DSCP marking applied consistently across switches, routers, and WAN edge devices
Priority queuing configured to guarantee bandwidth for voice and video
WAN traffic shaping to protect critical applications at the internet edge
Real-time monitoring and validation to confirm QoS policies are working
Structured network cabling for QoS-enabled infrastructure
What your network traffic looks like post-QoS deployment
Voice
EF (DSCP 46) - guaranteed lowest latency and jitter treatment
Video
AF41 (DSCP 34) - protected bandwidth with consistent delivery
Business Apps
AF21-AF31 - prioritized over best-effort at all congestion points
Backups
CS1 (DSCP 8) - shaped and rate-limited to never starve critical traffic
WAN Edge
Shaping policies ensure critical apps win during uplink congestion
Right traffic. Right priority. Every time.
Designed and validated by SRS Networks
What's Included

Complete QoS Deployment from Classification to Validation

From traffic classification design through DSCP marking, queuing configuration, WAN shaping, and post-deployment validation - SRS Networks owns every phase.

Traffic Classification & Marking

We identify every traffic class in your environment - VoIP, video, ERP, backup, best-effort - and mark packets with the correct DSCP values so every device downstream treats them appropriately.

Application and protocol identification
DSCP marking policy design
Trust boundary configuration

Queuing & Scheduling

Priority queuing (PQ), Low Latency Queuing (LLQ), and Weighted Fair Queuing (WFQ) configured on every switch and router so voice and video packets are never stuck behind bulk transfers.

LLQ for voice and real-time traffic
WFQ for best-effort traffic
Queue depth and threshold tuning

WAN Traffic Shaping

Your WAN link is usually the bottleneck. We configure traffic shaping and policing at the edge to ensure business-critical applications get guaranteed bandwidth - even under congestion.

Edge router QoS policy configuration
Traffic shaping and policing rules
Burst handling and rate limiting

Validation & Monitoring

We don't just configure and walk away. We validate QoS policies with real traffic, confirm DSCP markings are preserved end-to-end, and set up monitoring to catch regressions.

Pre- and post-deployment call quality testing
DSCP marking verification
Ongoing QoS performance dashboards
The Difference

Flat Network vs. SRS QoS-Optimized Network

What changes when you stop treating every packet the same and start enforcing intelligent traffic prioritization across your entire infrastructure.

Category
Without QoS
SRS QoS Implementation
VoIP call quality
Choppy, one-sided, or dropped calls
Sub-150ms latency with guaranteed priority queuing
Video conferencing
Freezes and buffers under network load
Protected bandwidth regardless of background traffic
ERP / CRM performance
Slow during peak usage hours
Prioritized over best-effort traffic at all times
Traffic visibility
No insight into what's using bandwidth
Full traffic classification and flow monitoring
Backup and updates
Compete equally with business apps
Shaped and rate-limited to off-hours or low priority
WAN congestion
Everyone loses bandwidth during peak
Critical apps guaranteed regardless of WAN load
SCADA / OT traffic
Converged with IT - no isolation
Dedicated priority class with consistent delivery
QoS documentation
None - tribal knowledge at best
Full policy docs and DSCP mappings at handoff
Real-World Use Cases

Who Needs QoS - and Why

Any organization running real-time traffic on a shared network needs QoS. These are the environments where the impact of getting it right is most immediate.

VoIP Call Quality Improvement

Voice traffic is delay-sensitive and jitter-intolerant. Properly configured LLQ and DSCP EF marking guarantees sub-150ms one-way delay for every call - eliminating the choppy audio complaints for good.

Video Conferencing Prioritization

Teams, Zoom, and Webex meetings need consistent bandwidth and low latency. QoS policies identify video conferencing flows and protect them from bulk traffic - even when the network is under load.

Healthcare Imaging Traffic

PACS and radiology imaging systems move large DICOM files that can saturate shared links. QoS ensures imaging traffic gets appropriate bandwidth without starving real-time clinical communications.

Manufacturing SCADA and IoT

Industrial control systems and SCADA traffic require consistent, low-latency delivery. QoS policies prioritize OT traffic and protect it from IT workloads competing on converged infrastructure.

Why SRS Networks

QoS That's Validated With Real Traffic - Not Just Config.

Most QoS engagements end when the configuration is applied. We end ours when the traffic confirms it's working. We test voice call quality, measure jitter and latency, verify DSCP preservation end-to-end, and hand off documentation that your team can actually use. Configuration without validation isn't a QoS deployment - it's a guess.

End-to-end QoS design across switches, routers, firewalls, and WAN edge devices
Platform-agnostic - Cisco, Palo Alto, Fortinet, HP Aruba, and more
Real-world validation with actual traffic - not just policy configuration
Documentation of all QoS policies, trust boundaries, and DSCP mappings
DSCP
End-to-End Marking
LLQ
Voice Priority Queue
WAN
Traffic Shaping
100%
Policy Validation
Related Services

Explore More from SRS Networks

For ongoing managed IT services and support, visit srsnetworks.net

Ready to Fix Your Network Performance?

Choppy VoIP, buffering video calls, and sluggish business apps aren't a bandwidth problem - they're a prioritization problem. We'll design and deploy the QoS architecture that fixes it end to end.

Quality of Service (QoS) Implementation | SRS Networks