Skip to content
SRS Networks
Industrial Networking

Network Infrastructure Built for Industrial Environments

SRS Networks installs approved industrial network equipment and cabling in factories, warehouses and production areas. The field package identifies mounting conditions, permitted work windows and required installation records.

The field scope covers approved cabling, DIN-rail mounting, equipment placement and installation records. Your engineers retain OT architecture, RF design, software configuration and operations.

The Problem

Why Office Networking Fails on the Production Floor

Temperature, vibration, moisture and power conditions should be recorded before equipment is approved. Your engineering and operations teams define the acceptable installation conditions, interruption window and restoration checks for the facility.

Consumer-Grade Equipment Failing in Harsh Conditions

Record the temperature, vibration, dust and moisture conditions for each installation area. The design owner should approve the exact equipment and enclosure ratings before procurement; an office or industrial product label alone does not settle suitability.

No Separation Between IT and OT Networks

When corporate IT traffic shares the same network as operational technology - PLCs, SCADA systems, and industrial controllers - a single misconfiguration or security incident can propagate directly to production equipment.

Unmanaged Switches on Production Floors

Identify which management functions the approved switch model supports and who configures them. The field work order should name the physical connections and escalation contact instead of assuming the installer owns network diagnostics or policy changes.

No Environmental Monitoring

Ask the facility to identify any required temperature, humidity or power sensors. Record their approved mounting positions and connections, then assign alert thresholds, platform integration and response procedures to the operations provider.

Network Downtime Impacting Production

Every minute of unplanned network downtime in a manufacturing or logistics environment carries a direct cost - stopped production lines, delayed shipments, and scrambling technicians with no diagnostic data to work from.

The Solution

Purpose-Built Infrastructure That Survives the Floor.

Your engineering team approves the equipment, architecture and environmental requirements. SRS coordinates the physical installation against that release: permitted routes, mounting details, material checks and documented exceptions. Configuration and operating acceptance remain with the appointed specialists.

Installation of the approved switch and AP models, with environmental and enclosure requirements checked against the work order
Cabling and device placement supporting the IT/OT boundaries in your approved architecture
Installation of customer-specified temperature, humidity and power sensors, with platform integration assigned to your operations provider
DIN-rail mounted equipment designed for panel and control cabinet installation without a dedicated server room
Industrial-grade cabling - shielded, armored, and rated for the actual physical demands of the installation environment
Industrial control panel with ruggedized networking equipment installed in DIN-rail enclosure
Records to agree for the industrial installation
Hardware
Installed models matched to the designer's approved equipment schedule
Mounting
DIN-rail, panel or cabinet work under the approved mounting detail
Boundaries
Physical IT/OT connections labeled for the customer's security and configuration owners
Monitoring
Approved sensor placement documented for your monitoring owner
Cabling
Cable types and routes recorded against the approved environmental requirements
Built for the floor. Not the office.
Field installation under your approved design
What's Included

Industrial Network Field Installation

From the site walk-through to cable testing and approved equipment installation, SRS Networks coordinates the field work. Engineering, configuration and operations responsibilities stay explicit in the work order.

Industrial Site Assessment

We walk the installation areas against your approved design. We record enclosure conditions, cable routes, equipment access and production constraints before fixing the field scope.

Facility walk-through and environmental condition documentation
Physical cable and equipment records checked against customer-supplied drawings
Installed-device inventory matched to the approved OT equipment schedule

Ruggedized Hardware Deployment

We install the switches, access points and media converters specified by your designer. Equipment ratings, mounting details, configuration ownership and staging checks are agreed before dispatch.

Customer-approved switch and AP inventory, staging and installation
DIN-rail, panel, and cabinet mounting per facility layout
Industrial-grade fiber and copper cabling installation

IT/OT Segmentation

Your OT and security engineers define the segmentation policy. We install the scheduled physical links and approved devices, label boundary connections and hand the records to the configuration owner.

Physical connections identified against approved corporate, OT and guest drawings
Customer-owned firewall policy and configuration handoff
Installation exceptions escalated to the authorized security owner

Environmental Monitoring Integration

We mount and cable approved sensors at the specified enclosures. Your monitoring provider owns software integration, alert thresholds and ongoing response; the installation record identifies each sensor and connection.

Sensor deployment at all network equipment enclosures
Connection records for your monitoring-platform specialist
Documented handoff to the alerting and escalation owner
The Difference

Compare the Installation Scope Before Releasing Field Work

Use the same equipment, mounting and evidence requirements when reviewing proposals. These are planning checks, not measured comparisons of contractors.

Category
Unverified installation scope
Approved installation record
Equipment durability
Unverified environmental rating
Hardware ratings checked against the approved equipment schedule
Temperature rating
Equipment rating not matched to the recorded ambient conditions
Temperature range confirmed for each specified model
IT/OT separation
OT devices share network with corporate traffic
Installed links match the customer-approved boundary drawing
Vibration resistance
Mounting and equipment tolerances left unspecified
Mounting detail and specified model checked by the design owner
Power interfaces
Supply type and power connections omitted from the work order
Physical connections documented against the approved power arrangement
Dust and moisture
Enclosure requirements not assigned to each installation area
Approved ingress rating and installation restrictions recorded by area
Monitoring
No visibility - failures discovered after production stops
Sensor installation records handed to the operations provider
Documentation
Acceptance records not agreed before the visit
Physical as-built changes, labels and required tests; logical IP plans supplied by the network owner
Real-World Use Cases

Where Industrial Networking Matters Most

Every industrial vertical has unique networking demands. These are the environments where purpose-built infrastructure directly protects production uptime and operational continuity.

Manufacturing Plants

Production environments with CNC machinery, robotic systems, and PLCs require ruggedized networking that survives vibration, coolant mist, and temperature extremes - while keeping OT systems isolated from IT.

Distribution Centers

Warehouse operations depend on barcode scanners, conveyor systems, and WMS applications running over reliable wireless coverage across high-bay environments with concrete, metal racking, and forklift traffic.

Food Processing Facilities

A freezer, washdown area and cleanroom can have different enclosure, material and access requirements. The facility and designer approve the applicable ratings, installation methods and food-safety restrictions for each area before field work.

Oil & Gas Facilities

Upstream and midstream oil and gas operations require ATEX/hazardous-area rated or isolated networking infrastructure that supports SCADA connectivity, safety system isolation, and remote site operations.

Why SRS Networks

Industrial Network Expertise, Deployed Nationwide.

Industrial field work must fit the plant's access, safety and production restrictions. SRS coordinates the released installation tasks with your OT engineers and operations contacts, keeping design approval, configuration and service restoration with their named owners.

Nationwide field deployment with project-relevant crew qualifications reviewed before dispatch
Equipment and enclosure models follow the customer's approved material schedule; substitutions require the designated approver
Agree physical as-built changes, cable labels, equipment records and required tests before dispatch; the network owner supplies logical configuration records
We coordinate the permitted work window, stop-work contact and installation handoff with your OT team, EPC contractors and controls engineers
50
States Covered
Industrial
Grade Hardware
Specified
Equipment Ratings
Agreed
Work Windows

Use an equipment schedule rather than a generic industrial rating

The installation package should identify the exact equipment model, enclosure, mounting method, cable rating and environmental requirements approved for each area. A label such as industrial does not specify the conditions at a washdown line, freezer, hot cabinet or vibrating machine. Record any mismatch for the designer before substituting a part or drilling a mount.

  • Environment: record the customer-specified temperature, ingress and mounting requirements by installation area.
  • Boundary: identify the OT engineer, network configuration owner and operations provider on the task record.
  • Closeout: reconcile model and serial, installed position, label and physical test result against the approved schedule.

NIST SP 800-82 Rev. 3: OT security — OT security must account for performance, reliability and safety. This guidance is not an SRS credential or a substitute for your controls engineer.

Ready to Build a Network That Survives Your Environment?

Send the approved drawings, equipment schedule and work-window restrictions. We can scope physical cabling, mounting and installation records for a refresh or new facility, with engineering and operations responsibilities identified.